0>>>CONCAT(CHAR(60),'/head',CHAR(62))
Online Consultation
TESTING ARTICLE

zixi alloy testing

2026-11-16 20:50:25In About Us

Testing Information

Zixi alloy testing is a service provided by ZHONGXI Testing for zixi alloy, a copper-based decorative and functional alloy in which copper is the principal element and is combined with alloying additions such as zinc, tin, nickel and small amounts of iron or lead to produce a distinctive purple-red metallic tone together with good castability, polishability and corrosion resistance. Zixi alloy is widely used in the manufacture of commemorative coins and medals, craft ornaments, watch cases and straps, architectural decorative panels, musical instrument components, zip fasteners, buttons and buckles, hardware fittings, souvenir gifts and a range of cast or wrought decorative parts where surface appearance and dimensional stability matter as much as mechanical performance.

The purpose of zixi alloy testing is to verify that the chemical composition of a batch falls within the specified grade limits, to confirm that the mechanical properties such as tensile strength, yield strength, elongation and hardness meet the requirements of the intended application, to evaluate surface quality including color uniformity, plating adhesion and corrosion behavior, and to identify defects such as porosity, inclusions, segregation or cracking that may arise during casting, rolling, forging or machining. The techniques involved include spark source atomic emission spectrometry for multi-element compositional analysis, inductively coupled plasma optical emission spectrometry for trace elements, X-ray fluorescence spectrometry for rapid screening and coating analysis, carbon sulfur and oxygen nitrogen hydrogen infrared absorption analysis for gas content, optical emission metallography for grain structure and phase distribution, scanning electron microscopy with energy dispersive spectroscopy for morphology and micro-area composition, microhardness and Rockwell/Brinell hardness measurement, uniaxial tensile testing, salt spray exposure testing, and metallographic examination of etched cross-sections.

A typical testing sequence for a zixi alloy sample begins with sample registration and visual inspection, followed by spectrometric full-element analysis of the matrix against the grade specification, including Cu, Zn, Sn, Ni, Fe, Pb, Al, Mn, Si, P, Sb, Bi and impurity elements. Depending on the product form, the laboratory then performs hardness measurement on a prepared flat surface, tensile testing on machined proportional or non-proportional test pieces cut from sheet, strip, rod or casting, grain size and phase structure evaluation on polished and etched metallographic sections, and corrosion testing in neutral salt spray or artificial perspiration solution for articles intended for skin contact such as buttons, buckles and watch parts. Core parameters reported typically include the actual content of each alloying element with uncertainty, tensile strength in MPa, yield strength, elongation after fracture in percent, hardness values in the selected scale, average grain size in micrometers, coating thickness in micrometers where plating is present, and the corrosion morphology after the specified exposure period.

FAQ

Which items does zixi alloy testing include?

Zixi alloy testing includes full compositional analysis covering Cu, Zn, Sn, Ni, Fe, Pb, Al, Mn, Si, P, Sb and Bi; mechanical property testing comprising tensile strength, yield strength, elongation, reduction of area, Rockwell, Brinell and Vickers hardness; structural examination including grain size, porosity, inclusion rating and phase identification; surface and coating testing including plating thickness, coating adhesion, surface roughness and color difference; and corrosion related testing including neutral salt spray resistance, artificial perspiration resistance and nickel release rate for skin-contact articles. The exact item list is determined by the product form, whether ingot, strip, wire, casting or finished plated part, and by the applicable grade and product standards the customer specifies on the testing request form.

What sample types are accepted for zixi alloy testing?

The laboratory accepts solid chunk samples of at least several grams with one flat surface suitable for spark spectrometry, drillings or millings taken from castings and large components for dissolution-based methods, sheet and strip offcuts wide and long enough for machining of tensile test pieces, rod and bar sections for hardness and metallographic preparation, wire coils for torsion and tensile evaluation, finished plated articles such as buckles, buttons and watch parts for coating thickness, adhesion, perspiration and nickel release testing, powder and granule samples sealed against oxidation, and process control specimens including slag, dross and swarf for recovery valuation. Samples should be free of oil, lacquer and heavy oxidation on the analysis surface; plated or lacquered finished parts may be tested as received when the coating itself is the object of evaluation.

Which standards does the testing follow?

Compositional and mechanical testing follows the recognized copper and copper alloy test method standards covering spark emission spectrometric analysis, ICP optical emission spectrometry, electrolytic gravimetric copper determination, room temperature tensile testing of metallic materials, Rockwell, Brinell and Vickers hardness testing, metallographic grain size and inclusion assessment, X-ray fluorescence coating thickness measurement, neutral salt spray corrosion testing, artificial perspiration testing for nickel release from articles in direct and prolonged contact with the skin, and related procedures for sampling, specimen preparation and rounding of results. Where the customer designates a specific material grade specification for a zixi alloy, the reported element contents are compared against the chemical limits of that designated grade, and the mechanical results are compared against the specified property minimums for the designated temper or product form.

Which testing methods are used for zixi alloy samples?

Principal element copper is determined by electrolytic gravimetry or by spark emission spectrometry calibrated with matching reference materials; accompanying and trace elements are measured by spark source atomic emission spectrometry on a lathe-finished surface, by ICP optical emission spectrometry after nitric acid dissolution of drillings, and by X-ray fluorescence for non-destructive screening. Mechanical properties are measured by uniaxial tensile testing on machined test pieces with extensometer strain measurement, supported by Rockwell and Vickers hardness testing on prepared surfaces and cross-sections. Structure is evaluated by optical metallography on polished and etched sections with quantitative grain size measurement by the intercept method, by inclusion and porosity rating at specified magnification, and by scanning electron microscopy with energy dispersive spectroscopy for inclusions and fracture features. Coating thickness is measured by X-ray fluorescence and microscopical cross-section methods, adhesion by bend and burnish testing, and corrosion behavior by neutral salt spray exposure and artificial perspiration immersion with nickel release quantification.

Testing Items

  •  
  • Wrought zixi alloy sheet and strip in thicknesses from 0.1 mm to 10 mm
  • Zixi alloy foil products for decorative lamination and inlay work
  • Zixi alloy rods and bars in round, square and hexagonal cross-sections
  • Zixi alloy wires for chain drawing, jump rings and decorative wire work
  • Zixi alloy tubes and pipes for structural and decorative applications
  • Zixi alloy coinage blanks and planchets for commemorative coin striking
  • Struck commemorative coins and medals in zixi alloy
  • Die-cast zixi alloy components for hardware and fittings
  • Gravity cast and sand cast zixi alloy ornamental parts
  • Investment cast zixi alloy jewelry settings and decorative findings
  • Zixi alloy watch cases, bezels, crowns and buckles
  • Zixi alloy watch straps and band segments after plating or oxidation
  • Zixi alloy buttons, rivets, snap fasteners and eyelets for garments
  • Zixi alloy zip sliders and zipper chains
  • Zixi alloy belt buckles, bag fittings and luggage hardware
  • Zixi alloy architectural decorative panels, trims and moldings
  • Zixi alloy musical instrument components such as instrument keys and trim parts
  • Zixi alloy souvenir gifts, trophies and plaque blanks
  • Zixi alloy powder and granules for powder metallurgy and thermal spray feedstock
  • Zixi alloy brazing filler materials and solder preforms
  • Zixi alloy electrical connectors and terminal components
  • Electroplated zixi alloy coatings on steel, zinc alloy and plastic substrates
  • Zixi alloy electroformed decorative shells and replicas
  • Zixi alloy 3D printed parts produced by binder jetting or directed energy deposition
  • Zixi alloy recycled scrap, dross and swarf for material recovery valuation
  • Zixi alloy strip for stamping and deep drawing of decorative shells
  • Antique-finished and oxidized zixi alloy surfaces after chemical coloring treatment

Summary

Zixi alloy testing covers chemical composition analysis, mechanical properties, metallographic structure, coating thickness and adhesion, corrosion resistance and nickel release evaluation for zixi alloy materials and finished decorative articles. Service scope extends from ingots, strip, rod, wire and castings to plated coinage, watch and hardware components, with routine turnaround generally within several working days and configurable item selection according to product form and designated grade requirements.

Related Testing

Knowledge & Articles

Our testing scope covers all fields including materials, chemica

Send us your samples, keep the certainty.

Engineers online 8:00-20:00 (GMT+8), AI support 24/7; reports generally in 7-15 working days.

Address: Room 118, 1st Floor, Building 1, No. 8 Hangfeng Road, Fengtai District, Beijing, China · Google Maps